Slide image

Shop our new arrivals:



Shipped directly from our brewery in Milwaukee, Wisconsin.

Cart 0

Sorry, looks like we don't have enough of this product.

Pair with
Is this a gift?
Subtotal Free
View cart
Shipping, taxes, and discount codes are calculated at checkout

Your Cart is Empty

How Small Batch Craft Soda Brewing Works

How Small Batch Craft Soda Brewing Works

Small batch craft soda is made by preparing a measured recipe, developing a flavored base, blending it to the intended strength, adding carbonation, and filling the finished drink into suitable containers. Each batch is treated as a defined production run, with its own ingredient quantities, processing records, and quality checks.

Some producers brew ingredients in a heated kettle. Others build their recipes with juices, extracts, or prepared flavor concentrates. The exact method depends on the soda. Root beer, cherry soda, and ginger ale may pass through similar equipment while requiring different formulations and flavor targets.

What makes the process interesting is how those choices connect. The water affects the starting flavor. Sweeteners influence the balance. Brewing or blending develops the base. Carbonation changes the drinking experience, while packaging helps preserve the result. A successful batch brings all of those stages together so the soda tastes as intended when someone opens it.

What Does Small Batch Mean for Soda

Small batch describes a production approach, but the words do not tell a shopper the exact number of gallons in a kettle or tank. To understand a producer’s method, look for concrete information about its batch size, equipment, ingredients, and brewing process.

The useful idea is that a batch has a defined beginning and end. A maker prepares a particular amount of a particular recipe, follows the relevant processing steps, and evaluates the result. The next batch is another production event, even when it uses the same formula.

A brewery can use pumps, temperature controls, filling equipment, and written specifications while making small batch soda. Those tools help the maker repeat the recipe. Handcrafted flavor and controlled production can work together.

Batch production also requires discipline. A smaller quantity does not automatically correct a weighing error, remove an unwanted flavor, or produce the right carbonation. The value comes from the decisions and checks applied to the batch, along with the recipe itself.

Sprecher offers a documented example of this approach. The company describes its craft sodas as fire-brewed in small batches and identifies honey and other flavor ingredients as part of its soda lineup (Sprecher Brewing Company, n.d.-b).

The Production Process at a Glance

Soft drink production commonly includes syrup preparation, blending, and carbonation. The University of Michigan’s process overview identifies these as central operations in making carbonated beverages (University of Michigan, n.d.). A small batch producer organizes its particular recipe and equipment around those functions.

Stage

What happens

Main purpose

Recipe development

Ingredients and flavor targets are established

Define the intended soda

Ingredient preparation

Water and other ingredients are measured

Start with the correct proportions

Flavor development

Ingredients are brewed, extracted, or blended

Create the flavor base

Final blending

The base reaches its finished concentration

Establish the ready-to-drink formula

Quality checks

Samples and process records are evaluated

Confirm the batch meets specifications

Carbonation

Carbon dioxide is dissolved in the beverage

Create the intended sparkling character

Packaging

Soda is filled and sealed

Protect the finished drink

Release and storage

Results and package performance are reviewed

Support consistent quality through distribution

 

This is an overview rather than one mandatory sequence. A product’s preservation treatment may occur at a different point depending on the process. Some systems also combine syrup and carbonated water during a later stage. The important requirement is that the complete process produces the intended finished beverage.

Step One Develop a Recipe That Works as a Finished Soda

Define the Flavor Before Scaling It

A new soda begins with a specific target. A developer might want a root beer with rounded sweetness and a lingering aromatic finish, a cherry soda with recognizable fruit character, or a ginger drink with a noticeable warming bite. Those descriptions guide the work because they identify what should be present in the finished sip.

Development then becomes a series of comparisons. One sample might contain a slightly different sweetener level. Another might adjust the acid or the concentration of the flavor base. Changing a limited number of variables at a time makes the results easier to interpret.

A successful trial needs more than a memorable first taste. The developer should consider how the drink tastes cold, how its carbonation fits the recipe, and whether it remains appealing through a normal serving. An intense syrup sample can be useful during development, but it is an intermediate product. Its flavor must be evaluated at the intended final dilution.

Turn the Trial Into a Measurable Formula

Once the flavor direction is established, the recipe needs precise quantities. Production depends on repeatable measurements rather than instructions such as add enough honey or brew until it seems ready.

Mass-based formulas make proportions explicit. In a simplified hypothetical example, an ingredient specified at 0.5 percent of final batch mass would contribute 0.5 kilograms to a 100-kilogram batch. That arithmetic shows how proportions can be scaled; it is not a soda recipe or a recommended ingredient concentration.

Liquid ingredients also bring water. Honey, juice, syrup, and liquid extracts cannot always be exchanged for dry ingredients at the same weight while preserving the original formula. Their water and dissolved components must be accounted for in the finished mixture.

The production document should identify the approved version of the recipe. That prevents a successful trial, an abandoned experiment, and the current commercial formula from being confused with one another.

Step Two Select and Prepare the Ingredients

Water Provides the Foundation

Water is the base into which the other ingredients are incorporated. Its suitability and consistency matter because every other flavor is being built on top of it.

Treatment should respond to the actual water supply. Activated carbon is one available technology for removing certain taste and odor compounds and other organic substances. The U.S. Environmental Protection Agency explains that carbon works through adsorption and that its performance depends on the treatment application and available capacity (U.S. Environmental Protection Agency, n.d.).

That does not mean every craft soda maker uses the same filtration system. It means that water preparation is an ingredient decision, and the producer needs a starting supply appropriate to its recipe and process.

Sweeteners Help Establish the Flavor Balance

A maker can use sugar, honey, another suitable sweetener, or a combination. The choice becomes part of the formula, influencing how the finished soda presents its other flavors.

Sprecher identifies honey in several product descriptions. Its Orange Dream pairs honey with citrus and vanilla, while its Cherry Soda description combines Wisconsin honey with Door County cherry juice (Sprecher Brewing Company, n.d.-a, n.d.-c).

These examples show why sweetener selection can be part of a soda’s identity. They do not mean that honey is necessarily the only sweetener in a product. The complete ingredient declaration is the appropriate source for checking all declared ingredients.

For the maker, the question is how the sweetener works at the final concentration. Adding more of a flavorful sweetener changes both sweetness and the contribution of that ingredient. Recipe development has to consider those effects together.

Flavor Ingredients Can Take Different Forms

Fruit juice, botanical ingredients, extracts, and prepared flavor systems offer different ways to build a soda. Juice contributes more than aroma: it also brings its own water, dissolved components, and appearance. A concentrated extract can deliver a particular flavor note in a smaller quantity. Whole ingredients may require an extraction and separation step.

The maker chooses the form that fits the intended drink. A carefully selected extract can be a deliberate production choice. A fruit juice can be central to a recipe when the producer wants that fruit source to remain identifiable.

Receiving and preparation should preserve the connection between the formula and the actual material being used. Ingredient names, supplier specifications, lot identification, and measured quantities make it possible to understand what went into a batch.

Step Three Brew or Blend the Flavor Base

The flavor base is the part of production where the recipe begins to become recognizable. Depending on the drink, the maker may steep solid ingredients, dissolve sweeteners, incorporate extracts, add juice, or combine several of these operations.

Some bases are concentrated so they can be diluted later. Others are prepared closer to the finished strength. The choice affects working volume, mixing requirements, and the point at which final quality measurements are meaningful.

Heated Brewing Uses a Controlled Process

When a recipe includes a heated stage, the maker needs to define the conditions that produce the intended result. Addition order, time, temperature, mixing, and final yield can all be relevant process details.

The goal is a repeatable flavor base. A general instruction to heat everything together leaves important questions unanswered. It does not specify when an ingredient enters the process, how long it remains there, or what the maker should check before moving on.

The amount of liquid remaining also matters. Heating can change yield through evaporation, and separating spent solids can remove some retained liquid. A production method should account for those changes when calculating the final beverage quantity.

Sprecher Uses a Gas Fired Kettle

Sprecher’s Orange Dream description identifies a gas-fired kettle and connects its small batch brewing method with the soda’s orange, vanilla, and honey profile. The company’s Cherry Soda description likewise identifies small batch brewing in a gas-fired kettle (Sprecher Brewing Company).

This gives readers a specific example of what a producer means by brewed soda. Heating is part of the flavor-making approach. The description does not provide a complete operating recipe, so exact temperatures, holding times, and ingredient proportions should come from direct brewery documentation rather than assumptions.

Cold Blending Is Another Production Route

A recipe built around suitable liquid ingredients may use blending without a heated flavor extraction stage. The maker still has to establish the correct proportions, achieve uniform mixing, and use an appropriate process to protect the finished product.

The distinction is about how the base is prepared. It does not remove the need for quality control. A brewed soda and a blended soda both need to deliver a consistent finished formulation.

Does Brewed Soda Undergo Fermentation

Brewing a flavor base and fermenting a beverage are different operations. A soda can be brewed with heat and later carbonated using an external supply of carbon dioxide, without a yeast fermentation stage.

During yeast fermentation, sugar conversion produces carbon dioxide and ethanol. Forced carbonation introduces carbon dioxide directly. The University of Florida’s carbonation guide explains these distinct routes to creating a sparkling beverage (Song et al., 2024).

The word brewed therefore does not establish that a soda contains alcohol. It needs to be understood in the context of the producer’s actual method. For a commercially sold drink, explicit product information provides a better answer than the production term alone.

Step Four Manage Particles and Flavor Dispersion

If a flavor base contains spent botanical material or other unwanted solids, those materials may need to be separated before later production stages. The FAO identifies filters, strainers, and sieves among equipment used in beverage processing (Food and Agriculture Organization of the United Nations, n.d.).

The desired result depends on the product. A clear soda and a drink intended to retain some fruit appearance have different visual targets. The maker needs to establish what belongs in the finished beverage and what should be removed.

Removing visible particles is also a different task from establishing microbial stability. A coarse strainer does not replace the product’s preservation process.

Oil Based Flavors Need Appropriate Dispersion

Some flavor ingredients contain oils that must be distributed through a water-based drink. An emulsion can disperse small oil droplets through the liquid, using a formulation designed to maintain the intended appearance and stability.

Research by Zhang and colleagues on orange oil nanoemulsions shows that composition and processing conditions affect droplet size, optical properties, and stability (Zhang et al., 2015). The relevance for soda is that dispersion is a formulation problem, not simply a matter of stirring longer.

This does not mean every citrus soda uses the same emulsion system. It explains why a maker may choose a prepared beverage flavor designed to disperse properly rather than adding an aromatic oil without a suitable formulation.

Step Five Bring the Batch to Final Strength

The maker now needs the batch to match the approved ready-to-drink formula. That may involve combining the prepared base with additional water and ingredients assigned to the blending stage.

A final blend must be uniform before it is sampled. Otherwise, a result from one location may not represent the rest of the vessel. A measurement is only useful when the sample actually answers the production question.

This stage is also where yield records become valuable. The producer can compare the amount expected from the recipe with the amount actually prepared. An unexplained difference may indicate a measurement error, an incorrect addition, or a loss that needs to be investigated.

Measure Soluble Solids and Acidity

Soluble solids, pH, and titratable acidity describe different properties of a beverage. Cornell’s beverage laboratory lists them as separate analyses and identifies refractometry, pH measurement, and titration as relevant methods (Cornell University, n.d.).

Degrees Brix provide a sucrose-equivalent measure of soluble solids. In a drink containing acids, juice, and other dissolved materials, the result is not a direct replacement for a complete sugar analysis or nutrition calculation.

pH characterizes the beverage’s acid conditions. Titratable acidity measures acid neutralized using a defined analytical procedure. These values can be considered alongside sensory evaluation, but they are not interchangeable.

For a batch maker, the practical purpose is consistency. Results should be compared with product specifications using a defined sampling and measurement method. If the batch is outside its expected range, the cause needs to be understood before production continues.

Step Six Cool and Carbonate the Soda

Carbonation means dissolving carbon dioxide into the beverage. It is a controlled production step with a target for the finished drink.

Temperature and pressure influence how much carbon dioxide a beverage holds. Colder liquid can hold more dissolved gas at a given pressure. A porous carbonation stone is one method of introducing gas through the liquid, and dissolved carbonation can be expressed as gas mass per liquid volume or as volumes of carbon dioxide (Song et al., 2024).

These relationships explain why a pressure setting alone is not a complete carbonation specification. The equipment, liquid temperature, and desired dissolved gas level need to be considered together. One setting should not be presented as a universal recipe for all craft soda.

Carbonation Must Survive the Rest of Production

The gas introduced during production needs to remain in the beverage through filling and storage. Otherwise, a batch that met its tank target may deliver a different experience from the sealed package.

Opening a carbonated drink reduces the pressure above the liquid, allowing carbon dioxide to escape. Surfaces that provide nucleation sites help bubbles form. The American Chemical Society explains the pressure dependence of gas solubility and the role of these bubble-forming sites (American Chemical Society, n.d.).

This connects the production process with a familiar experience: a drink can foam or lose fizz when handled and poured. The maker must evaluate the packaged soda, not assume that successful carbonation in a vessel guarantees the same result at serving.

Step Seven Use a Preservation Process Suited to the Product

A packaged soda needs a process appropriate to its formulation, equipment, package, and intended storage conditions. Depending on the drink, this may involve heat treatment, permitted preservatives, refrigeration, or a validated combination of controls.

The University of Georgia’s carbonated beverage assessment illustrates this product-specific approach. Its process authorities review formulation, physical characteristics, and test results, including verification of pH and/or water activity. Thermal recommendations are provided when applicable (University of Georgia, n.d.).

This is why a maker cannot establish the entire process by taste or by copying a single treatment from another recipe. A soda’s flavor base, final dilution, ingredients added later, and filling method are all parts of the finished system.

Carbonation is not sterilization. Likewise, a heated brewing stage does not automatically establish that the final packaged drink has received an adequate preservation treatment. Smith and Stratton (2007) explain that preservation methods depend on the product, safety needs, and processing facility.

Cleaning and Sanitation Continue Throughout the Batch

Cleaning removes soil and residues. Sanitation follows appropriate cleaning to reduce microorganisms on relevant surfaces. Clemson’s brewing guidance distinguishes these tasks and emphasizes contamination control throughout production (Thompson, 2021).

For soda, the principle applies to ingredient preparation equipment, kettles, tanks, transfer lines, valves, and filling parts. Residue left in one part of the system can affect the next product passing through it.

Flavor carryover is another reason the change between recipes deserves attention. A ginger note in a drink intended to taste only of cherry would be a quality problem even if the cherry formula had been weighed correctly. Equipment preparation needs to support both the intended flavor and the producer’s ingredient controls.

The batch record and cleaning procedures work together here. One identifies what was made and when. The other establishes how equipment is prepared for its next use.

Step Eight Fill and Seal the Soda

Packaging transfers the beverage from production equipment into the container the customer will open. The maker needs to maintain the intended fill quantity, manage foaming and gas loss, and protect the product during the transfer.

Pressure-controlled filling equipment can help manage the change between a carbonated tank and a receiving container. In a counterpressure arrangement, the receiving container’s pressure is controlled during filling to limit an abrupt pressure change.

The exact arrangement depends on the production line. Some systems fill already blended, carbonated soda. Others combine syrup and carbonated water differently. The University of Michigan’s overview describes distinct blending and carbonation arrangements, reinforcing that all soda lines do not follow one identical configuration (University of Michigan, n.d.).

The Container and Closure Have a Technical Job

A carbonated soda package needs to be suitable for internal pressure. The FAO specifically identifies pressure resistance as a consideration when choosing beverage closures (Food and Agriculture Organization of the United Nations, n.d.).

The cap or can seam is therefore part of the finished product’s performance. A leaking closure can undermine an otherwise successful batch. The maker also needs packaging appropriate for food contact and the beverage it contains.

The FDA identifies sanitary production, suitable additives and food-contact packaging substances, and truthful labeling among relevant aspects of carbonated soft drinks (U.S. Food and Drug Administration, n.d.). The final label should describe the actual product rather than a trial version or an earlier recipe.

How Makers Keep One Batch Consistent With the Next

Consistency depends on several kinds of evidence. Sensory checks show whether the soda tastes right. Analytical checks describe relevant properties. Production records show what happened. Package checks establish whether the container is performing its role.

Quality check

What it evaluates

Useful comparison

Sensory evaluation

Aroma, flavor, appearance, and finish

Approved product character

Soluble solids

Formulation and dilution consistency

Product specification

Acidity testing

pH and relevant acid measurements

Defined analytical limits

Carbonation measurement

Dissolved gas in the beverage

Finished product target

Fill and closure checks

Quantity and package integrity

Packaging specification

Laboratory testing

Relevant microbial and stability questions

Product-specific test plan

 

The particular tests and acceptance limits depend on the soda and process. The table explains the different questions rather than prescribing one release program for every producer.

LSU AgCenter describes testing of both food products and environmental samples, including microbial analyses relevant to bacteria, yeasts, and molds (LSU AgCenter, n.d.). Laboratory support can help investigate a concern that visual inspection and tasting cannot resolve.

Records Make Differences Investigable

A useful batch record connects the recipe version, ingredient lots, measured additions, process observations, and packaging run. If a finished product differs from expectations, the maker can review those details rather than rely on memory.

For example, an unusually weak flavor could prompt a review of dilution and ingredient additions. A package that loses carbonation could prompt checks of the fill and seal. These are different investigations, even when both are first reported as the soda tasting wrong.

Batch production is most valuable when the boundaries between runs are clear enough to support that review. The record gives a producer a way to learn from a problem and confirm the effect of a correction.

How Shelf Life Is Established

A soda must remain acceptable after it leaves the production line. Shelf life considers the period over which the product retains its relevant quality characteristics under specified conditions.

Kansas State University identifies both product properties and external conditions that influence shelf life, including pH, antimicrobial agents, time, temperature, gases, and physical stress. It also distinguishes physical, microbial, and chemical deterioration (Kansas State University, 2026).

For a soda maker, the evaluation may include aroma, color, appearance, flavor, package performance, and appropriate laboratory tests. A beverage can change in more ways than simply going flat.

Testing should reflect the actual product and process. Smith and Stratton (2007) recommend using samples from trial production runs rather than relying only on test-kitchen samples because the methods and environments differ. LSU AgCenter likewise requests shelf-life samples in their final packaged form (LSU AgCenter, n.d.).

This makes a production trial an important development step. The maker learns whether the formula, equipment, package, and storage plan work together beyond the original small tasting sample.

How Small Batch Production Shapes Craft Soda

Small batch production gives a maker defined quantities to formulate, process, evaluate, and document. It can support careful development of distinctive flavors and a clear connection between the recipe and the finished drink.

It also makes comparison important. If the maker changes an ingredient source, adjusts a brewing step, or introduces a new package, the relevant result needs to be checked. A recipe that succeeded in one set of conditions should not be assumed to perform identically after every change.

The same applies to scale. Increasing ingredient quantities preserves their mathematical proportions, but the process still needs to work in the equipment being used. Heating, mixing, transfer, and filling must produce a uniform beverage at the new quantity.

This is where craft and measurement meet. The maker defines the desired flavor and then uses a controlled process to deliver it repeatedly.

What the Process Means for the Soda in Your Glass

Small batch craft soda reaches the glass through a sequence of deliberate choices. The recipe establishes its identity. Water and ingredient preparation provide a consistent starting point. Brewing or blending develops the flavor base. Final measurements guide consistency, carbonation creates the sparkling character, and packaging protects the result.

Sprecher’s published descriptions provide examples of how those choices can become recognizable product features: small batch fire brewing, honey, fruit juice, and combinations such as citrus and vanilla. The broader production principles explain how a maker turns those features into a finished soda.

The result of good production is a drink that delivers its intended character when opened. Small batch craft soda is made by developing that character carefully, measuring the process, and carrying the flavor through every stage to the final package.

References

American Chemical Society. (n.d.). Unleashing carbon dioxide.

https://www.acs.org/education/activities/unleashing-carbon-dioxide.html

Cornell University. (n.d.). Juice analyses.

https://cals.cornell.edu/cornell-agritech/our-expertise/cornell-craft-beverage-institute/craft-beverage-analytical-lab/juice-analyses

Food and Agriculture Organization of the United Nations. (n.d.). Beverages.

https://www.fao.org/4/x5434e/x5434e0b.htm

Kansas State University. (2026, June 30). Shelf life of food products.

https://extension.k-state.edu/kvafl/resources/technical-assistance/shelf-life.html

LSU AgCenter. (n.d.). Commercial testing.

https://www.lsuagcenter.com/topics/food_health/food/safety/food%20safety%20lab/commercial-testing

Smith, D. A., & Stratton, J. E. (2007). Food preservation, safety, and shelf life extension (G1816). University of Nebraska–Lincoln Extension.

https://extensionpubs.unl.edu/publication/g1816/na/html/view

Song, X., Wendrick, N., Sims, C. A., & MacIntosh, A. (2024). A guide to carbonating beverages at small scale (FSHN20-34). University of Florida, IFAS Extension.

https://ask.ifas.ufl.edu/publication/FS379

Thompson, A. R. (2021, November 2). Cleaning and sanitation for the homebrewer (HGIC 3885). Clemson Cooperative Extension.

https://hgic.clemson.edu/factsheet/cleaning-and-sanitation-for-the-homebrewer/

University of Georgia. (n.d.). Carbonated beverages.

https://foodscience.caes.uga.edu/extension/services/process-authority-services/carbonated-beverages.html

University of Michigan. (n.d.). Soft drinks. Visual Encyclopedia of Chemical Engineering Equipment.

https://encyclopedia.che.engin.umich.edu/soft-drinks/

U.S. Environmental Protection Agency. (n.d.). Overview of drinking water treatment technologies.

https://www.epa.gov/sdwa/overview-drinking-water-treatment-technologies

U.S. Food and Drug Administration. (n.d.). Carbonated soft drinks: What you should know.

https://www.fda.gov/food/buy-store-serve-safe-food/carbonated-soft-drinks-what-you-should-know

Zhang, J., Bing, L., & Reineccius, G. A. (2015). Formation, optical property and stability of orange oil nanoemulsions stabilized by Quallija saponins. LWT, 64(2), 1063–1070.

https://doi.org/10.1016/j.lwt.2015.07.034